Clogged drains or sewer line backups can wreak havoc on your business, and we know that plumbing emergencies rarely align with business hours which is why Roto Rooter provides after hours plumbing. Sudden, unexpected plumbing emergencies can have a serious negative impact on your business—any amount of downtime can result in missed opportunities and the inability to serve your clients, potentially leading to lost revenue. When plumbing emergencies occur at your place of business, you need an emergency plumber you can trust.

Plumbing Service Co Denver


My husband and I found Spengler after a not so great experience with an a/c company over the summer. We called Spengler due to great online reviews and they did not disappoint! They came out the same day our furnace broke and offered professional service and were friendly. My husband appreciated that they explained all the options and what was actually wrong with our furnace instead of just trying to charge us a lot of money. I will definitely be using them again in the future.
Nationally, the average water heater repair cost ranges between $120 and $200, although prices can range up to $400 or more. Water heater repair costs will depend on the type of water heater you have (tankless, electric, natural gas, etc.), the source of the problem, the cost for new parts, and labor rates in your area. Common water heater issues include problems with the thermocouple, thermostat, heating element and leaks. Most standard electric water heaters have two thermostats and two elements. One example for the cost to replace a bad thermostat is $185 for parts and labor. Replacing both the thermostat and the heating element could cost approximately $150-$200. The thermocouple is a safety device that senses when the pilot light is burning and signals the gas valve to close if the pilot light goes out. If your thermocouple is bad or corroded, the average cost to clean and repair it could be between $350 and $400. If your water heater has started to leak, it is usually more cost-effective to invest in a new water heater than to repair it, unless you’re covered by a warranty.
Hello I had a plumber do an estimate for me to replace our copper pipes with plastic as we have no existing walls up in our basement yet...pretty basic job... so we figured we could upgrade as we do live in Northern Ontario and it does tend to get quite cold here in the winters.  We dont have any existing problems with our plumbing right now just figured it would be good time to do the job and perhaps change the pipes to 3 quarter inch for faster flow.  Well I never thought in all my life I would get an estimate back that would state $350.00 an hour in labor...yes that is correct $350.00 an hour...estimated 10 hours for the job to be completed.  So he quoted me $3500.00 for labor alone.. not supplies?  Well needless to say I will be happy with my half inch copper pipes and will happily wait for my bathtub to fill up at a slower pace.  Just wanted to know what your thoughts are on this $350.00 an hour quote?  Thank you and enjoy your day.
After completing an apprenticeship program, plumbers, pipefitters, and steamfitters are considered to be journey workers, qualifying them to perform duties on their own. Plumbers with several years of plumbing experience may earn master status by passing an exam. Some states require a business to employ a master plumber in order to obtain a plumbing contractor’s license.

Drain Rescue is definitely true to it's name. My drain was completely blocked and not at all functional when I called them. They asked if I needed someone to come out the same day (it was evening). I declined since it wasn't really an emergency, just a huge inconvenience. The plumber came out right on the time the next morning and had my drain fixed in about 30 minutes. The service was excellent and the price was reasonable. I would definitely recommend them to anyone needing a plumber.


My husband and I found Spengler after a not so great experience with an a/c company over the summer. We called Spengler due to great online reviews and they did not disappoint! They came out the same day our furnace broke and offered professional service and were friendly. My husband appreciated that they explained all the options and what was actually wrong with our furnace instead of just trying to charge us a lot of money. I will definitely be using them again in the future.
After completing an apprenticeship program, plumbers, pipefitters, and steamfitters are considered to be journey workers, qualifying them to perform duties on their own. Plumbers with several years of plumbing experience may earn master status by passing an exam. Some states require a business to employ a master plumber in order to obtain a plumbing contractor’s license.
The Federal Government does not regulate licensing for plumbers; they are on a state-by-state government level. Most states have some sort of licensing requirement for plumbers and any general contractors. However, if plumbers aren’t licensed, they could be subjected to expensive fines and it could result in the loss of their being allowed to practice their trade.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

If you need a plumber, call the plumbers that were rated Baltimore’s Best by Baltimore Magazine. At BGE HOME, we’ll get the job done safely and professionally. Our expert plumbers can quickly and reliably handle any plumbing problem, large or small. BGE HOME plumbers fix clogged drains, leaky faucets, toilets, boilers, sump pumps, and much more. Our team of professionals will ensure that the job is completed quickly and efficiently so you are up and running again as soon as possible.

Need a quick fix? After having a plumber come out to your house, they might tell you the part needed to fix your toilet or sink issue is going to take a week. Don’t be too amenable if you can’t wait. There’s no shame in working with another plumber who can get the part and do the job when you need it. If you’re doing the job yourself, be sure you know these tips for completing a plumbing fix like a pro.
There are many reasons to work with our team, but what really sets us apart from other contractors is how we listen to our customers. We personalize every call by taking the time to listen to your needs and getting to the source of your problem. We do not carry out work without first discussing the issue with you in detail and presenting you with your options. 

Nationally, the average water heater repair cost ranges between $120 and $200, although prices can range up to $400 or more. Water heater repair costs will depend on the type of water heater you have (tankless, electric, natural gas, etc.), the source of the problem, the cost for new parts, and labor rates in your area. Common water heater issues include problems with the thermocouple, thermostat, heating element and leaks. Most standard electric water heaters have two thermostats and two elements. One example for the cost to replace a bad thermostat is $185 for parts and labor. Replacing both the thermostat and the heating element could cost approximately $150-$200. The thermocouple is a safety device that senses when the pilot light is burning and signals the gas valve to close if the pilot light goes out. If your thermocouple is bad or corroded, the average cost to clean and repair it could be between $350 and $400. If your water heater has started to leak, it is usually more cost-effective to invest in a new water heater than to repair it, unless you’re covered by a warranty.
Looking for plumbing repairs and installations you can rely on? Contact JD Precision Plumbing Services today at (936) 228-5000 to speak with our experts. JD Precision Plumbing Services provides quality residential plumbing services for homeowners throughout Spring, TX. Since 1982, we have helped numerous homeowners just like you with their plumbing repairs and installations.
My plan was to have an old kitchen faucet head replaced with a new one I had bought, a 5 minute job at most. The plumber told me it would first be a $28 assessment fee and then a "job " cost but they could not quote phone costs or give me any indication of a range cost. I declined to use them and to find a handyman instead. Plumbers stories significantly overcharging  seem prevalent and I could see it could well happen to me. I got a handyman who did the job in 3 minutes flat! The Plumbing Costs Chart you sent out is good, it shows it would probably have cost me $200 for 5 minutes plus $28 assessment fee.
At Hildebrant’s Plumbing Repair, we believe that God acts in mysterious ways, yet His plan is always perfectly sovereign. This truth challenged our family in a way we would have never dreamed. In 2009, our son Tyler was diagnosed with a severe kidney failure. Like many others who suffer similar medical conditions, Tyler continues to experience everything from irregular blood pressure to chronic pain. He must stay on dialysis to manage his symptoms.
When you need a plumber, it’s not unusual to need one quickly. When you call us, you can be assured that your plumbing issue will be solved quickly and efficiently. Issues such as broken water heaters, overflowing toilets, and frozen pipes just can’t be ignored. You need to deal with them quickly. No matter what plumbing issue you’re experiencing, we can help to get it fixed.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
Plumbing can be an exceptionally lucrative career for those in the field, not excluding women. And now especially because more contractors are eager to train women in plumbing. It’s not that plumbing companies don’t want women to work for them, in fact, quite the opposite. Women just don’t seem to be packing in to learn the male-dominated trade. The fact is, women can find an excellent, well-paying career as a plumber just as easily as men, if not more so.
If you have any questions, please check out our frequently asked questions page on this site. If you don’t see what you are looking for, our specialists will be happy to assist you. If you would like to schedule a service call with our Frisco based plumbing company, or we can be of any assistance, please call us at 972-346- 2332. For your convenience, you may also request an appointment here.
For the highest quality plumbing, heating, and AC repair services in Port St. Lucie, give your local experts at I Need the Plumber & Air Conditioning a call! Our family owned and operated company has 22 years of experience and is deeply rooted in a foundation of providing service and workmanship no less than the best. It is our desire to ensure that the families we serve have a relaxing place to come home to after a hard day's work, or a comfortable office environment for anyone to easily get plugged in. Considering the fact that we have handled thousands of jobs that left our customers happy and exceedingly satisfied, we know that we're doing our jobs.
"Leak Chaser's Plumbing did a great job. I needed to get my new kitchen sink plumbing reconnected after getting new countertops installed and with an existing garbage disposal and new dishwasher. I thought that I could do it myself and save some money, but of course, I got in over my head. The charges were very reasonable and comparable to the other quotes. Nothing's free plumber's have to get their professional lincenses renewed annually at a costly fee like the rest of us in different professions. He was very professional and patience with me. I would recommend and hire them again. Shout out to the DIYers!"
Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.[20]
The Fluidmaster 550DFRK-3 Duo Flush System Toilet Converter The Fluidmaster 550DFRK-3 Duo Flush System Toilet Converter gives you a tool to help save on water use and water bills. A complete toilet fill and dual flush conversion kit that retrofits into any 2-Inch flush valve toilet. Instructions included for hassle free and easy installation which doesn’t require removing ...  More + Product Details Close 

Turn to the experienced team at our company for prompt solutions to your plumbing issues. Those in need of a skilled plumber in Tampa, FL, can expect immediate assistance from a qualified professional that is both friendly and attentive. We value your time and respond quickly to all residential service calls. If you have a severe water leak or some other major plumbing problem, a licensed plumber is available 24/7. Whether you need a clogged drain cleaned or a toilet replaced, our skilled and friendly team is able to handle it. We take pride in providing high-quality professional plumbing services to residential locations throughout the area.
Most plumbing training programs will include things such as coursework and on-the-job training. But, above and beyond what’s included you should expect other costs like books, tools, and uniforms which can range between a few hundred to a few thousand dollars. Depending on which program you choose, you may have to think about living expenses, as well.
I think it is rather rude and a bit dishonest for people to not divulge their total fees upfront, an of course we should know to ask. But the normal person wouldn't know the questions to ask until they are burnt once like this, and then there still could be costs for walking up stairs or charge another service call if they need to go somewhere to use the bathroom and come back. THAT ISN'T A QUESTION I WOULD THINK TO ASK.

Rooter Repair Company Denver

×