"We just moved to a new house and Luke did an amazing job installing our home entertainment system. We thought we had a simple TV mounting project, but Luke was able to connect all our equipment (some of which was a bit outdated) so we have one seamless audio/visual system. Plus he was able to fix some errors that Comcast had made and willing to jump in and work on a few other small projects I needed done before the holidays. His price was reasonable and in the week since he performed the work I've had 2 people knowledgeble in contracting or wiring compliment the quality of his work."
Most states and localities require plumbers to be licensed. Although licensing requirements vary, most states and localities require workers to have 2 to 5 years of experience and to pass an exam that shows their knowledge of the trade and of local plumbing codes before they are permitted to work independently. In addition, most employers require plumbers to have a driver’s license.
Finally, a quality contractor will not risk working with a shoddy plumber. A simple error -- a joint left unsoldered or a leaky PVC line -- can easily devastate $10,000 worth of walls or hardwood floors and complicate the job with insurance claims, lost time, and lawsuits. With so much riding on the plumber, contractors tend to stick with only the best.
I have no problem paying for any service I receive but when Allied Reddi-Rooter came into my home and immediately tell me and them tell me it would cost me 350.00 for them to install a new Rheem water heater (his recommendation) that cost 409.00 I have a problem. If the cost is exactly how Home Advisor indicates then he’s charging 350.00an hour.  I did my homework checked with other plumbers and it. Would not take an hour to remove old and install the new water heater. Thank Goodness I did my research won’t be using their services and I will be letting others know what happen to me. Shame on you Allied 

I think it is rather rude and a bit dishonest for people to not divulge their total fees upfront, an of course we should know to ask. But the normal person wouldn't know the questions to ask until they are burnt once like this, and then there still could be costs for walking up stairs or charge another service call if they need to go somewhere to use the bathroom and come back. THAT ISN'T A QUESTION I WOULD THINK TO ASK.
Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.
For details about apprenticeship or other opportunities in this occupation, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor's Apprenticeship program online, or by phone at 877-872-5627.
PVC/CPVC – rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970. PVC stands for polyvinyl chloride, and it has become a common replacement for metal piping. PVC should be used only for cold water, or for venting. CPVC can be used for hot and cold potable water supply. Connections are made with primers and solvent cements as required by code.[23]
I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly.  The technician tested the pump and it wasn't responding. He then checked the  breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.
Master Plumber: To become a master plumber, you must first work for two consistent years as a Journeyman. You must also take an exam and pass both the written and practical portions of it. Once you’ve passed and are a Master Plumber, you can work supervisory roles, and you are also qualified to plan and design entire plumbing systems in addition to your previous skills.
Of course, some repairs are easier and quicker to handle than others. Some are a major hassle—particularly those that involve working on pipes that are hidden behind walls or under floors or are otherwise difficult to access. This doesn’t mean you can’t do them yourself, it just means you may need a little more instruction, a few more tools, and a load of patience.
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]
It’s a smell and a sight that no one wants to see in their home. If your home has a main sewer line backup, call the family-owned Houston plumbers with over 50 years of experience – John Moore Services. Our master plumbers will inspect your home’s plumbing system and examine the pipes from the inside out using cables and high-tech sewer line cameras to determine the cause and extent of the stoppage. No cookie-cutter fixes here. Each situation is unique, and the visual inspection of your line allows the John Moore team to determine the best possible fix for your specific issue. And with our upfront pricing, there will be no surprises. For sewer backups and main line clean outs, replacements and repair, you can count on our plumbing company in Houston.
Many trades are looking at a critical time because more people are retiring than entering the fields. Plumbing is just one of those trades facing similar issues. Many women thinking about going into trade professions may stay away from plumbing based on some stereotypical thoughts like, say, plumbers buttcrack (yes, it’s a thing), and the fact that it can be an exceptionally messy job (such as clogged toilets). However, many women in the plumbing field feel that they are treated very professionally by both their male co-workers and their clients.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
Luke and Seng were wonderful. Water not draining is troubling for any homeowner. Both were very professional and comforting as they assessed and worked to correct my problem. I was alarmed when is was not a quick fix but they made the extra effort to correct my problem so no concrete floor is being wrapped up today. Benjamin Franklin plumbing is on at the top of my list.
If you start hearing any strange noises, notice unpleasant smells coming out or your sump pump or it simply doesn't kick in for a long time please call our team of plumbing experts immediately for a free consultation. It might be the last chance to save your property from flooding and have us professionally install a new high-quality sump pump in the place of the old one for you. 

Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly.  The technician tested the pump and it wasn't responding. He then checked the  breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.
But more and more plumbers are charging "by the fixture," and their bids are based on the rough-in for drain and supply lines ($300 to $400 in my area) and installation of the fixtures themselves (about $200). Plumbing parts and fixtures for a powder room with a sink and toilet run $1,000 to $1,200, though you can easily spend much more. With this approach, you know the turnkey price going into the job, and any surprises are the plumber's responsibility, not yours. This Old House: Sensible payment plans E-mail to a friend
Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.
The median annual salary for plumbers is $51,450. The highest 10% can earn six figures, while those just starting out as plumbers will probably make more along the lines of $30,430. Apprentices bring home between 30%-50% of what fully trained plumbers earn. The more they learn, the more they’ll earn. It is not uncommon for master plumbers to make over $90K.

Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[39] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[40]
Here is an odd problem that I cannot figure out. I am handy with electrical stuff, but this one has me stumped. My small kitchen appliances all work on a single circuit, with 5 outlets. One of those outlets has a 20Amp breaker built into it with a test and resent button (I never understood what the test button is for). I only have a toaster, a floor lamp and occasionally a coffee grinder plugged into the circuit. Suddenly, none of the outlets work. Nothing new, no new appliances, the whole circuit went dead. I noticed when I trigger the reset button, there is an immediate click and it goes out again. I have tripped and reset the main breaker on the circuit board in the garage, nothing. Power gets to the outlet, but it doesn't work and there is no electricity in any of the 5. I un plugged everything. Reset the breaker on the outlet. It clicked again immediately, still no electricity. I changed out the outlet, with a new one with breaker built in which I bought today at Home Depot. Same problem. I tested for electricity, the outlet with the built in breaker receives 120v electricity coming in, but it always seems to be shorted out and does not send it out. I assume that all of the 5 outlets are connected inline, so thinking that if I went one by one, I'd be able to find a short. I opened all of the boxes, checked everything and all looks clean, new, no problems. I completely disconnected the two outlets that are closest to the main one with thereset button and nothing.Help
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination. 

"I needed to hire a painter for my place of business which is a hair salon. I hired Jose and he was just fantastic! His communication was very thorough and he was on time and he did a wonderful job. I actually needed him to repaint the room from a prior painter who did a very sloppy job. Jose made my room look bright and beautiful and on top of it he cleaned everything so thoroughly. He wanted to leave my room spotless and I could tell he took a lot of pride in his services. I was very impressed with his work and I have already hired him to do a plumbing job next in my salon. He is the nicest guy you want to work with and he has an excellent work ethic. He is very upfront and honest he will tell you what he can or cannot do and his prices are very fair. Jose is going to be my go to guy for any handyman work I need in my salon going forward. I highly recommend him for whatever your handyman needs maybe. This man is a true professional!"

Home repairs and maintenance shouldn’t get pushed to the bottom of the to-do list. Unfortunately, most people don’t think they need plumbing repair services until there’s an emergency. While some plumbing issues may seem minor, they could actually be serious emergencies in the making. Routine repairs from Mr. Rooter® Plumbing are affordable, and they’ll save you from paying for emergency plumbing rescue in the future.

If it’s a toilet issue you’ve got, you’re sure to find the right toilet parts and replacement pieces – including shutoff valves and supply lines – to get your toilet in tip-top shape. We’ve also got shower parts and shower valves, sink parts and faucet parts, as well as everything for bathtub repair – all to get your bathroom up and running in top-top shape.


Severe plumbing emergencies can cause a lot of collateral damage and result in high costs if not addressed immediately. For example, if your basement floods at 2:00 A.M., it’s vital that an emergency plumber visits right away to resolve the problem and prevent further water damage. Our technicians can arrive at your residence as soon as possible, bringing state-of-the-art equipment to address the plumbing emergency, complete the job in a timely and efficient manner, and get your household plumbing systems back to normal quickly. Providing 24/7 plumbing is just one of the many services Roto Rooter fulfills.
As with other construction workers, employment of plumbers, pipefitters, and steamfitters is sensitive to fluctuations in the economy. On the one hand, workers may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of workers may occur in some areas during peak periods of building activity.
Specialized plumbing tools include pipe wrenches, flaring pliers, pipe vise, pipe bending machine, pipe cutter, dies, and joining tools such as soldering torches and crimp tools. New tools have been developed to help plumbers fix problems more efficiently. For example, plumbers use video cameras for inspections of hidden leaks or other problems; they also use hydro jets, and high pressure hydraulic pumps connected to steel cables for trench-less sewer line replacement. 
×