"After reaching out to Dallas area Leak Detection company all had me backed out for days for a response. I went to Thumbtack and found DC who was able to get right on the issue of a major leak I had flooding my home near the garage water heater closet. He was determined to find the leak which was diagnosed to be behind the wall and we were able to isolate and only tear out the area of damage and leak and he fixed the busted on the one and only Pex tubing on this house which had hairline crack during this last winter freeze. He fixed the leak and was very professional, responsive and most of all Punctual he drove far because I live up far North Dallas area in Grayson County. Also the value in the repair for where I am located was easier on my budget. I would definitely rehire and go to DC for my future plumbing needs. A real Winner in my book of tradesman."
When you are faced with a plumbing emergency, time is of the essence. You don’t want to have to spend time searching for a plumber near you that is open nights, weekends, and holidays that won’t charge you exorbitant fees for immediate availability to address plumbing emergencies. Roto-Rooter plumbers offer a variety of emergency plumbing services around the clock at an affordable price, so you can get the plumbing services you need at a price that won’t break the budget. Roto-Rooter professionals are always available for after hours plumbing services.

Home repairs and maintenance shouldn’t get pushed to the bottom of the to-do list. Unfortunately, most people don’t think they need plumbing repair services until there’s an emergency. While some plumbing issues may seem minor, they could actually be serious emergencies in the making. Routine repairs from Mr. Rooter® Plumbing are affordable, and they’ll save you from paying for emergency plumbing rescue in the future.
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[20]
Many trades are looking at a critical time because more people are retiring than entering the fields. Plumbing is just one of those trades facing similar issues. Many women thinking about going into trade professions may stay away from plumbing based on some stereotypical thoughts like, say, plumbers buttcrack (yes, it’s a thing), and the fact that it can be an exceptionally messy job (such as clogged toilets). However, many women in the plumbing field feel that they are treated very professionally by both their male co-workers and their clients.
plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures.   I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again. 
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
When you need a plumbing repair, rely on our certified, skilled plumbers. When it comes to the plumbing system in your home, you need someone you can trust to keep it in top working order; someone who can get there quickly and who will do the job right the first time. BGE HOME is your resource for plumbing service and can promptly take care of any repair, from stopping a leak, drain cleaning, fixing a garbage disposal, and everything in between. Whether your kitchen sink is clogged, a faucet is dripping or your water heater springs a leak, our priority is getting your plumbing problem repaired quickly and efficiently. Your satisfaction is our top priority, so our plumber will keep you informed and ensure we are meeting your expectations.

You need the right tools when repairing your plumbing systems or installing new devices. Menards® has a large variety of plumbing tools, including pipe threading; plumbing hand tools; plumbing tool kits; and torches and soldering tools. Keep your drains clean and free of clogs with our drain cleaning equipment and supplies, including hand, chemical, and powered solutions.


Most large cities today pipe solid wastes to sewage treatment plants in order to separate and partially purify the water, before emptying into streams or other bodies of water. For potable water use, galvanized iron piping was commonplace in the United States from the late 1800s until around 1960. After that period, copper piping took over, first soft copper with flared fittings, then with rigid copper tubing utilizing soldered fittings.
There are many reasons to work with our team, but what really sets us apart from other contractors is how we listen to our customers. We personalize every call by taking the time to listen to your needs and getting to the source of your problem. We do not carry out work without first discussing the issue with you in detail and presenting you with your options.
Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.

plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures.   I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again. 
As with other construction workers, employment of plumbers, pipefitters, and steamfitters is sensitive to fluctuations in the economy. On the one hand, workers may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of workers may occur in some areas during peak periods of building activity.
With over 20 years experience in Air Conditioning and Plumbing Repairs in the greater Las Vegas area, we will get the job done right the first time. We answer our telephones 24 hours a day and 7 days a week. Our technicians are Experienced, Drug Tested, Passed A Background Check, Licensed and Fully Trained. We give upfront Flat Rate pricing which means you pay by the job and not by the hour. All of our quotes are complete and presented to the client before work begins. The price you are quoted is the price you pay. No hidden fees or surprises!
The Sunny Plumber provides plumbing services throughout the Southwest United States. From basic plumbing repairs to top-of-the-line equipment installation, our Sunny Plumbers do it all. Our team is committed to providing your family with the cleanest water, most efficient systems, and freedom from the worry of plumbing problems in your home. We can’t wait to show you why they call us bright and shiny!

If you have any questions, please check out our frequently asked questions page on this site. If you don’t see what you are looking for, our specialists will be happy to assist you. If you would like to schedule a service call with our Frisco based plumbing company, or we can be of any assistance, please call us at 972-346- 2332. For your convenience, you may also request an appointment here.
We are the highly experienced emergency plumber providing 24-hour plumbing services throughout Los Angeles, Orange County and surrounding area in California. Our professional plumbing technicians are experts at all things plumbing, and we take pride in nurturing home-grown plumbers through our in-house training program. Take a look at our service areas.  No local plumbing company can beat our service or our coverage area.
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]
There’s often an Allen wrench that comes with the garbage disposal. I keep it under the sink. When the thing jams, follow the directions in the manual, and I won’t need to come out. Another plumbing tip, don’t believe the myth about putting lemon peels in the disposal to make it smell better. That will just make it jam faster.  These are the things you should never pour down the drain.
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.
PVC/CPVC – rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970. PVC stands for polyvinyl chloride, and it has become a common replacement for metal piping. PVC should be used only for cold water, or for venting. CPVC can be used for hot and cold potable water supply. Connections are made with primers and solvent cements as required by code.[23]

Leaky, dripping, rusting faucets can drive you crazy. Is it time to repair, replace or upgrade your faucets? John Moore, the area's trusted master Houston plumbing team since 1965, can examine your fixtures and help you determine whether it can be repaired or if a new faucet is needed. We have a wide variety of replacement parts on hand to resolve most common faucet repairs quickly. If a new fixture is in your future, John Moore carries the latest styles from the industry’s top brands such as Moen, Kholer, and Delta. Have you decided to freshen up your home’s décor with a new look? Are you interested in adding a sprayer to make doing dishes a little quicker and easier? Or perhaps you want a motion sensitive / touch-free kitchen faucet make washing up more sanitary. Whatever your vision or needs may be, purchasing your faucet and installation from John Moore means that you will receive expert installation of a quality fixture that will last for years to come.


My plumbing experience was  to have the plumbing  disconnected under the sink so the counter top and new sink could be installed.  I thought the service  of $115 was high, but usually if there is an additional fees, it is usually rolled into the cost of repairs or labor.  This company also charged 3.75 % for putting it on a credit card, which was not mentioned until I received the invoice in the mail after paying on the phone.

The word "plumber" dates from the Roman Empire.[3] The Latin for lead is plumbum. Roman roofs used lead in conduits and drain pipes[4] and some were also covered with lead, lead was also used for piping and for making baths.[5] In medieval times anyone who worked with lead was referred to as a plumber as can be seen from an extract of workmen fixing a roof in Westminster Palace and were referred to as plumbers "To Gilbert de Westminster, plumber, working about the roof of the pantry of the little hall, covering it with lead, and about various defects in the roof of the little hall".[6] Thus a person with expertise in working with lead was first known as a Plumbarius which was later shortened to plumber.

×