A homeowner in Arkansas doesn’t need a license to do the work himself or herself. However, a contractor (if used) must be licensed if the work, including labor and material, exceeds $2,000.00. Subcontractors working for a licensed contractor do not need their own license. However, if the general contractor is not licensed, then the subcontractor does need their own license.
With our highly trained and experienced technicians serving your plumbing, heating, and cooling needs, our workmanship comes with a 100% satisfaction guarantee. We don't send any of our staff members on the front line until we are completely sure that they are qualified for the job. For that reason, they're all drug tested and background checked before joining our team. We also require that they attend ongoing training to stay ahead of the curve with the latest advancements in technology.
When making a selection, ask for proof of a license. Most states require plumbers to be licensed, and they typically provide a number you can call to verify that the license is current and that there are no active complaints against it. Any plumber you consider should also hold a current workers' compensation policy and a minimum of $500,000 liability insurance.
Certification: Certifications are not requirements, but they do help plumbers regarding career advancement. Once the plumber has completed the apprenticeship and has successfully gotten their license, they will be eligible to sit for the certification exams. There are a few different certifications available to plumbers. Through the Plumbing-Heating-Cooling-Contractors Association, in partnership with Green Plumbers USA, there is a training and certification program available for water and energy efficient technologies. With the way the environment is going green, this certification is a good idea for plumbers to consider. There is also the National Inspection Testing Certification(NITC) available to Journeymen Plumbers. The NITC also offers Journey and Master Plumber level certifications for plumbing codes and a Mastery certification exam for plumbers with over five years experience. There are fees involved, and they vary depending on the exam.
Most states and localities require plumbers to be licensed. Although licensing requirements vary, most states and localities require workers to have 2 to 5 years of experience and to pass an exam that shows their knowledge of the trade and of local plumbing codes before they are permitted to work independently. In addition, most employers require plumbers to have a driver’s license.
Sid called ahead and let me know what time he would show up. He arrived on time and quickly determined what needed to be fixed and explained it. He needed to make a few trips out to his truck to grab tools/supplies and put shoe covers on each time he entered the house. He quickly fixed our issue and cleaned up when he was finished. Great service from Sid! Just had another visit to fix a leaking meter horn. Andrew called 20 minutes before he arrived and quickly decided what needed repair. He didn't have the exact part needed on his truck, but he was able to get it from the warehouse quickly. He fixed our issue and cleaned up the area well. Thanks to Andrew and Ben Franklin Plumbing for fixing our plumbing problem on Christmas Eve!
After completing an apprenticeship program, plumbers, pipefitters, and steamfitters are considered to be journey workers, qualifying them to perform duties on their own. Plumbers with several years of plumbing experience may earn master status by passing an exam. Some states require a business to employ a master plumber in order to obtain a plumbing contractor’s license.
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
Turn to the experienced team at our company for prompt solutions to your plumbing issues. Those in need of a skilled plumber in Tampa, FL, can expect immediate assistance from a qualified professional that is both friendly and attentive. We value your time and respond quickly to all residential service calls. If you have a severe water leak or some other major plumbing problem, a licensed plumber is available 24/7. Whether you need a clogged drain cleaned or a toilet replaced, our skilled and friendly team is able to handle it. We take pride in providing high-quality professional plumbing services to residential locations throughout the area.
"After reaching out to Dallas area Leak Detection company all had me backed out for days for a response. I went to Thumbtack and found DC who was able to get right on the issue of a major leak I had flooding my home near the garage water heater closet. He was determined to find the leak which was diagnosed to be behind the wall and we were able to isolate and only tear out the area of damage and leak and he fixed the busted on the one and only Pex tubing on this house which had hairline crack during this last winter freeze. He fixed the leak and was very professional, responsive and most of all Punctual he drove far because I live up far North Dallas area in Grayson County. Also the value in the repair for where I am located was easier on my budget. I would definitely rehire and go to DC for my future plumbing needs. A real Winner in my book of tradesman."
Roto-Rooter’s expert plumbers are on call 24 hours a day, 365 days a year to provide emergency plumbing services for homes and commercial establishments. Our emergency plumbers provide the full range of Roto-Rooter services including toilet repair, unclogging drains, leak repair, water damage cleanup and restoration, and more. Roto-Rooter professionals are standing by to provide 24/7 plumbing services.
Plumbing professionals on the Handy platform offer permanent solutions to plumbing problems, saving you time and money. With their experience and expertise, they'll be able to protect you against a range of hazards, such as exposure to foul water and even flooding. Often, these hazards are caused by an unqualified homeowner, thinking they can tinker their way to success. Using a professional and local plumber, you don't need to run those risks. However, Handy isn't just for the big jobs—you can book a cheap plumber for work of any size. Whether you need a clogged drain dealt with or a full-scale water heater installation, booking local plumbing services through Handy ensures that the job is done right the first time.
The Pink Plumber truly leads the way when it comes to plumbing services for both residences and commercial properties. Whether you have an emergency, you are installing new fixtures or you just need routine maintenance our expert staff is here to help 24/7. We understand that you depend on your plumber to get to the root of the plumbing problem and provide an effective solution. We provide outstanding client service which is one of the main reasons why we have thousands of satisfied clients.
Nothing wears on homeowners like the idea of handling plumbing problems. From the water heater to sewer line, let Mr. Rooter Plumbing take the pressure off of you (and put it back in your shower lines). Our plumbers are the most recognized professionals in the world because we’re committed to amazing service and amazing results. In everything we do, our team makes sure your home’s plumbing issues are solved with the most effective and long-lasting solutions.
Nationally, the average water heater repair cost ranges between $120 and $200, although prices can range up to $400 or more. Water heater repair costs will depend on the type of water heater you have (tankless, electric, natural gas, etc.), the source of the problem, the cost for new parts, and labor rates in your area. Common water heater issues include problems with the thermocouple, thermostat, heating element and leaks. Most standard electric water heaters have two thermostats and two elements. One example for the cost to replace a bad thermostat is $185 for parts and labor. Replacing both the thermostat and the heating element could cost approximately $150-$200. The thermocouple is a safety device that senses when the pilot light is burning and signals the gas valve to close if the pilot light goes out. If your thermocouple is bad or corroded, the average cost to clean and repair it could be between $350 and $400. If your water heater has started to leak, it is usually more cost-effective to invest in a new water heater than to repair it, unless you’re covered by a warranty.
Abacus’ HVAC (heating, ventilating, and air conditioning) technicians are experts at inspecting and repairing systems that are not cooling or heating properly. They specialize at everything from condensers, coils, air ducts, air filtration to complete AC installations and AC replacements with the best warranties in Houston. Need an annual tune up? Ask about the Abacus BAM! Plan. Annual checkups can help prevent many issues from happening to your air conditioning system. BAM! gives customers one tune-up for their heating and another for their air conditioning. This makes sure that you have what your home needs when you need it. You also get the benefits of VIP scheduling and up to 15% off of HVAC services.
"I needed to hire a painter for my place of business which is a hair salon. I hired Jose and he was just fantastic! His communication was very thorough and he was on time and he did a wonderful job. I actually needed him to repaint the room from a prior painter who did a very sloppy job. Jose made my room look bright and beautiful and on top of it he cleaned everything so thoroughly. He wanted to leave my room spotless and I could tell he took a lot of pride in his services. I was very impressed with his work and I have already hired him to do a plumbing job next in my salon. He is the nicest guy you want to work with and he has an excellent work ethic. He is very upfront and honest he will tell you what he can or cannot do and his prices are very fair. Jose is going to be my go to guy for any handyman work I need in my salon going forward. I highly recommend him for whatever your handyman needs maybe. This man is a true professional!"
For many centuries, lead was the favoured material for water pipes, because its malleability made it practical to work into the desired shape. (Such use was so common that the word "plumbing" derives from plumbum, the Latin word for lead.) This was a source of lead-related health problems in the years before the health hazards of ingesting lead were fully understood; among these were stillbirths and high rates of infant mortality. Lead water pipes were still widely used in the early 20th century, and remain in many households. In addition, lead-tin alloy solder was commonly used to join copper pipes, but modern practice uses tin-antimony alloy solder instead, in order to eliminate lead hazards.
Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.
Pipefitters, sometimes simply called fitters, install and maintain pipes that carry chemicals, acids, and gases. These pipes are used mostly in manufacturing, commercial, and industrial settings. Fitters install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize as gasfitters, sprinklerfitters, or steamfitters.
As with other construction workers, employment of plumbers, pipefitters, and steamfitters is sensitive to fluctuations in the economy. On the one hand, workers may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of workers may occur in some areas during peak periods of building activity.
BEST Air Conditioning Plumbing Repair, is a Nevada (NV) Heating, Cooling, Air Conditioning, Plumbing, Heat Pump, Ductless Mini-Split, Water Heater, and Furnace repair, service, replacement, and maintenance Company located in Las Vegas area. BEST Air Conditioning Plumbing Repair employs only the best plumber for plumbing repair and technician for air conditioner, furnace, and heat pump repair as well as all air conditioner, furnace, and water heater replacement in Las Vegas NV, Henderson NV, The Lakes NV, North Las Vegas NV, Sloan NV, Nellis Afb NV, Boulder City NV, Blue Diamond NV, Jean NV. So when you ask to find "A good heating, air conditioning, and plumbing repair or service company near me," you've come to the right place. To set-up a repair service estimate or replacement estimate, call (702) 857-5307. BEST Air Conditioning Plumbing Repair services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Daikin, Mitsubishi, Fujitsu, Frigidaire, Gibson, Goodman, Maytag, A O Smith, Kohler, American Standard, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.*The service within 45 minutes applies to owner occupied households only, within service area, new customers or those on our BEST membership plan, during normal business hours of 8am-4pm Monday through Friday, all other times/days will still get same day service. Our guarantee is that if we don’t arrive within 45 minutes of call being scheduled that the service fee is waived.
We are here to help with yearly maintenance, water heater flushes, and pan replacement. For those suffering from a leaky water heater, John Moore can even repair your water damaged walls and floors without the headache of dealing with multiple contractors. Houston homeowners have counted on John Moore for decades. Each Houston plumber we employ is at your service.