The high-pressure hydro-jetting service from the Houston plumbers here at John Moore offers homeowners a safe and highly effective way to clear their drain lines. John Moore uses state of the art hydro-jetting to scour and clear debris such as tree roots, soil, grease, and hardened scale for blocking your drain and sewer lines. Drain jetting using highly pressurized water streams safely cleans in the inside of your plumbing pipes and without risking damage from a standard cable or blade. We’ll even show you video footage of the inside of your pipes so you can see how well things are flowing again. Trust the Certified Drain Cleaning Plumbers at John Moore for a superior drain jetting experience.
If it’s a toilet issue you’ve got, you’re sure to find the right toilet parts and replacement pieces – including shutoff valves and supply lines – to get your toilet in tip-top shape. We’ve also got shower parts and shower valves, sink parts and faucet parts, as well as everything for bathtub repair – all to get your bathroom up and running in top-top shape.

If it’s a toilet issue you’ve got, you’re sure to find the right toilet parts and replacement pieces – including shutoff valves and supply lines – to get your toilet in tip-top shape. We’ve also got shower parts and shower valves, sink parts and faucet parts, as well as everything for bathtub repair – all to get your bathroom up and running in top-top shape.


The word "plumber" dates from the Roman Empire.[3] The Latin for lead is plumbum. Roman roofs used lead in conduits and drain pipes[4] and some were also covered with lead, lead was also used for piping and for making baths.[5] In medieval times anyone who worked with lead was referred to as a plumber as can be seen from an extract of workmen fixing a roof in Westminster Palace and were referred to as plumbers "To Gilbert de Westminster, plumber, working about the roof of the pantry of the little hall, covering it with lead, and about various defects in the roof of the little hall".[6] Thus a person with expertise in working with lead was first known as a Plumbarius which was later shortened to plumber.
Apprenticeship: A plumber apprentice studies under a journeyman or master plumber to learn the trade on the job as well as through coursework. Most apprenticeship programs are an average of 2,000 on-the-job hours and 246 classroom hours which takes 2-6 years to complete. The most common way to enter an apprenticeship is through a plumbers union. A great resource to find out about local apprenticeships is through the United Association. Another way is studying under a licensed plumber.

Home repairs and maintenance shouldn’t get pushed to the bottom of the to-do list. Unfortunately, most people don’t think they need plumbing repair services until there’s an emergency. While some plumbing issues may seem minor, they could actually be serious emergencies in the making. Routine repairs from Mr. Rooter® Plumbing are affordable, and they’ll save you from paying for emergency plumbing rescue in the future.


Here’s a little fact: For every three skilled trade workers leaving their industry, there is only one skilled trade worker entering it. This fact holds true for the plumbing industry, as well. According to the Bureau of Labor Statistics website, the employment outlook for skilled plumbers is expected to grow 16 percent through 2026. The average job employment outlook is around 5%-7% which means plumbing is growing much faster than average.


With our highly trained and experienced technicians serving your plumbing, heating, and cooling needs, our workmanship comes with a 100% satisfaction guarantee. We don't send any of our staff members on the front line until we are completely sure that they are qualified for the job. For that reason, they're all drug tested and background checked before joining our team. We also require that they attend ongoing training to stay ahead of the curve with the latest advancements in technology.

The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
It’s a smell and a sight that no one wants to see in their home. If your home has a main sewer line backup, call the family-owned Houston plumbers with over 50 years of experience – John Moore Services. Our master plumbers will inspect your home’s plumbing system and examine the pipes from the inside out using cables and high-tech sewer line cameras to determine the cause and extent of the stoppage. No cookie-cutter fixes here. Each situation is unique, and the visual inspection of your line allows the John Moore team to determine the best possible fix for your specific issue. And with our upfront pricing, there will be no surprises. For sewer backups and main line clean outs, replacements and repair, you can count on our plumbing company in Houston.

Nationally, the average water heater repair cost ranges between $120 and $200, although prices can range up to $400 or more. Water heater repair costs will depend on the type of water heater you have (tankless, electric, natural gas, etc.), the source of the problem, the cost for new parts, and labor rates in your area. Common water heater issues include problems with the thermocouple, thermostat, heating element and leaks. Most standard electric water heaters have two thermostats and two elements. One example for the cost to replace a bad thermostat is $185 for parts and labor. Replacing both the thermostat and the heating element could cost approximately $150-$200. The thermocouple is a safety device that senses when the pilot light is burning and signals the gas valve to close if the pilot light goes out. If your thermocouple is bad or corroded, the average cost to clean and repair it could be between $350 and $400. If your water heater has started to leak, it is usually more cost-effective to invest in a new water heater than to repair it, unless you’re covered by a warranty.
If you start hearing any strange noises, notice unpleasant smells coming out or your sump pump or it simply doesn't kick in for a long time please call our team of plumbing experts immediately for a free consultation. It might be the last chance to save your property from flooding and have us professionally install a new high-quality sump pump in the place of the old one for you.
*Price per line. Full size external clean-out access required for drain cleaning and video inspection. Residential Only. Valid at participating ARS® / Rescue Rooter® Network locations. Not valid for third party, new construction customers, with any other offers or discounts, or prior sales. Coupon required at time of service. Void if copied or transferred and where prohibited. Any other use may constitute fraud. See service center for details. Cash value $.001. ARS® Rescue Rooter®. License # TACLA018810E R. Hoffart, MPL41408 S. Neidig, TECL28671 M. James. Offer expires: 2/28/2019.

Needed to replace a water pressure regulator.  Looking at the retail costs of the regulator, they seem to run from abouit $60 to over $300 for one that includes more that the basic control of water pressure in the house.  Had not used a pro plumber for over 20 years so I was not up on the costs associated with needing their help.  I was contacted by at least 3 plumbers but only one, Right Now Plumbers, gave me an instant quote of $394  for the service without me even asking. Although I thought this price seemed a little high for a job that takes less than an hour to complete, I accepted their service.  Must say that the job was done very professionally and would use them again if needed.  However,
PVC/CPVC – rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970. PVC stands for polyvinyl chloride, and it has become a common replacement for metal piping. PVC should be used only for cold water, or for venting. CPVC can be used for hot and cold potable water supply. Connections are made with primers and solvent cements as required by code.[23]
We know that a well informed customer is a satisfied customer. This is why we put a priority on educating our customers on the situation at hand, rather than pushing a service on you without an explanation. When you work with us, you will receive an explanation of the problem and what we think is the best course of action. Of course, you will always receive options. If what we recommend does not fit with your current budget, we will present an alternate option to you. This means if a repair is more cost-effective, we will let you know and won’t try to get you to go for a replacement. By having options, you are able to make the best decision for you and your family. You can opt for long term peace of mind, or something more budget-friendly for the time being.You will never find hidden charges or fees on your bill - what we quote you upfront is what you pay, nothing more.
If left unfixed, a running toilet or a leaky faucet can end up costing you hundreds of dollars. Check out your water bill and how your water is running. If you find your kitchen dripping non-stop and your water bill going higher, you may have a leak! Let Parker & Sons put a stop to those leaks. Our team of expert plumbers will make sure to get the work done faster, get it right the first time, and do it efficiently.
Houston’s ever-shifting clay soil puts homes in the greater Houston area at risk from slab leaks. Why? When the concrete slab under your home shifts, the pipes in or underneath the foundation can be damaged, disconnected, or break completely. Fortunately, John Moore plumbers have been working with Houston homeowners since 1965 and have the experience, training and tools to effectively detect and repair slab leaks. Our experienced plumbing team will perform a careful inspection, pinpoint the location, and then provide you with a detailed diagnosis and repair plan to address the leak quickly. For a serious plumbing issues, such as a slab leaks and re-pipes, you can count on our Houston plumbing company, John Moore Services, to treat you and your home with respect and provide you with quality workmanship – guaranteed
Another way to avoid a service call from your plumber is to make sure the outside faucets are turned off in the winter and make sure you disconnect the outside hoses. You need to shut the water off from the inside. Then, open the valve on the outside to let the water that’s in there drain out—you switch both of them to the opposite direction so one is always closed and one is always open. We have to fix tons of these in the spring mostly because people leave their outside hoses connected and they freeze up. The repair could cost $100-$200 or more. Another tip would be if you’re going away for any length of time, like on vacation, turn off your water. If on any of those days the temperature drops below freezing, have someone check in on your house. I’ve been called to homes where the family returned from vacation, and there was water flooding out from the front door.
×