Sid called ahead and let me know what time he would show up. He arrived on time and quickly determined what needed to be fixed and explained it. He needed to make a few trips out to his truck to grab tools/supplies and put shoe covers on each time he entered the house. He quickly fixed our issue and cleaned up when he was finished. Great service from Sid! Just had another visit to fix a leaking meter horn. Andrew called 20 minutes before he arrived and quickly decided what needed repair. He didn't have the exact part needed on his truck, but he was able to get it from the warehouse quickly. He fixed our issue and cleaned up the area well. Thanks to Andrew and Ben Franklin Plumbing for fixing our plumbing problem on Christmas Eve!
After completing an apprenticeship program, plumbers, pipefitters, and steamfitters are considered to be journey workers, qualifying them to perform duties on their own. Plumbers with several years of plumbing experience may earn master status by passing an exam. Some states require a business to employ a master plumber in order to obtain a plumbing contractor’s license.

After completing an apprenticeship program, plumbers, pipefitters, and steamfitters are considered to be journey workers, qualifying them to perform duties on their own. Plumbers with several years of plumbing experience may earn master status by passing an exam. Some states require a business to employ a master plumber in order to obtain a plumbing contractor’s license.
I had 207 Plumbing come to fix a leak in my ceiling.  It's a terrible, terrible company to do business with.  He came and fixed a broken pipe in the ceiling, and I asked him to check the rest of the pipe to make sure that nothing else was broken, he said everything was OK and charged me $219.00 for 45 minutes and left.  Never cleaned up his mess.  I went to clean up the mess after he left and found there was more damage to the pipe.  I called him to come back, which he did.  He looked at the water coming down from the ceiling, into a light fixture and said he had another job to go to and couldn't come back until next week.  He also wanted to charge me $350.00 to come back.  I told him that was too much and he said he would make an exception and only charge me $219.00.  Now I have major damage done to the ceiling, the light fixture and the floor.  All of this could have been prevented if he had stayed and fixed the problem.  I will NOT hire him again.

"Leak Chaser's Plumbing did a great job. I needed to get my new kitchen sink plumbing reconnected after getting new countertops installed and with an existing garbage disposal and new dishwasher. I thought that I could do it myself and save some money, but of course, I got in over my head. The charges were very reasonable and comparable to the other quotes. Nothing's free plumber's have to get their professional lincenses renewed annually at a costly fee like the rest of us in different professions. He was very professional and patience with me. I would recommend and hire them again. Shout out to the DIYers!"

Nationally, the average water heater repair cost ranges between $120 and $200, although prices can range up to $400 or more. Water heater repair costs will depend on the type of water heater you have (tankless, electric, natural gas, etc.), the source of the problem, the cost for new parts, and labor rates in your area. Common water heater issues include problems with the thermocouple, thermostat, heating element and leaks. Most standard electric water heaters have two thermostats and two elements. One example for the cost to replace a bad thermostat is $185 for parts and labor. Replacing both the thermostat and the heating element could cost approximately $150-$200. The thermocouple is a safety device that senses when the pilot light is burning and signals the gas valve to close if the pilot light goes out. If your thermocouple is bad or corroded, the average cost to clean and repair it could be between $350 and $400. If your water heater has started to leak, it is usually more cost-effective to invest in a new water heater than to repair it, unless you’re covered by a warranty.
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
Plumbing originated during ancient civilizations such as the Greek, Roman, Persian, Indian, and Chinese cities as they developed public baths and needed to provide potable water and wastewater removal, for larger numbers of people.[6] Standardized earthen plumbing pipes with broad flanges making use of asphalt for preventing leakages appeared in the urban settlements of the Indus Valley Civilization by 2700 BC.[7] The Romans used lead pipe inscriptions to prevent water theft. The word "plumber" dates from the Roman Empire.[8] The Latin for lead is plumbum. Roman roofs used lead in conduits and drain pipes[9] and some were also covered with lead. Lead was also used for piping and for making baths.[10]
I have no problem paying for any service I receive but when Allied Reddi-Rooter came into my home and immediately tell me and them tell me it would cost me 350.00 for them to install a new Rheem water heater (his recommendation) that cost 409.00 I have a problem. If the cost is exactly how Home Advisor indicates then he’s charging 350.00an hour.  I did my homework checked with other plumbers and it. Would not take an hour to remove old and install the new water heater. Thank Goodness I did my research won’t be using their services and I will be letting others know what happen to me. Shame on you Allied
There are few things worse than waiting for a local plumber after being given an 8 hour time window, while your sink is spouting water all over the carpet or your toilet is overflowing. Using the Handy platform, you can arrange an exact time for your plumber to arrive, which means you don’t have to take an entire day off of work to sit around and wait for them. The plumbers near me on the Handy platform have seen it all and they have the ratings and reviews to prove it.  We’ll match the details of your job with a reliable plumber in your area before you know it.
Master plumbers on construction jobs may be involved with developing blueprints that show the placement of all the pipes and fixtures. Their input helps ensure that a structure’s plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires. Many diagrams are now created digitally with the use of Building Information Modeling (BIM), which allows a building’s physical systems to be planned and coordinated across occupations.
If you have any questions, please check out our frequently asked questions page on this site. If you don’t see what you are looking for, our specialists will be happy to assist you. If you would like to schedule a service call with our Frisco based plumbing company, or we can be of any assistance, please call us at 972-346- 2332. For your convenience, you may also request an appointment here.

Even though the employment growth is excellent, employers are still reporting difficulty in finding skilled plumbers to fill the growing void being created by those who are retiring. New building construction, along with stricter regulations on industry standards for economic efficiency plumbing are both reasons for the spike in job openings. Find a local plumbing trade school program. 

^ Jump up to: a b Joseph O. Falkinham III; Elizabeth D. Hilborn; Matthew J. Arduino; Amy Pruden; Marc A. Edwards (August 2015). "Epidemiology and Ecology of Opportunistic Premises Plumbing Pathogens: Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa". Environ Health Perspectives;. 123 (8). doi:10.1289/ehp.1408692. Archived from the original on May 31, 2015. Retrieved August 1, 2015.

I wanted to commend Sergio Reynoso (Minneapolis) on his outstanding service. I needed a consult on my water heater, and he was prompt and courteous. Even though I was told my heater needed to be replaced, he gave me options and explained the process for me in a way that made sense. He went out of his way to ensure I felt comfortable in the decision-making process, without any daunting sales pressure. I will definitely be sure to call again in the future!
Quoted Prices Stay the Same We know how frustrating it is to be told one price before the job, but see a completely different (higher!) number on your invoice. When you work with us, you can rest assured that price will not change. We do not change the price based on how long the job takes. What we quote at the beginning is what you can expect once the work is complete.
We strive to stay ahead of the curve with new equipment and employee training which is why we are regarded as a pioneer in this field. Our professionals leave no stone unturned in order to solve any type of problem you find with your pipes for fixtures. From a backed up bathtub, flooded basement, leaky pipes to a stopped up toilet; they can handle it all. In keeping with our client-focus approach; we have designed appropriate service agreements that are very client friendly.

Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
The high-pressure hydro-jetting service from the Houston plumbers here at John Moore offers homeowners a safe and highly effective way to clear their drain lines. John Moore uses state of the art hydro-jetting to scour and clear debris such as tree roots, soil, grease, and hardened scale for blocking your drain and sewer lines. Drain jetting using highly pressurized water streams safely cleans in the inside of your plumbing pipes and without risking damage from a standard cable or blade. We’ll even show you video footage of the inside of your pipes so you can see how well things are flowing again. Trust the Certified Drain Cleaning Plumbers at John Moore for a superior drain jetting experience.
I had 207 Plumbing come to fix a leak in my ceiling.  It's a terrible, terrible company to do business with.  He came and fixed a broken pipe in the ceiling, and I asked him to check the rest of the pipe to make sure that nothing else was broken, he said everything was OK and charged me $219.00 for 45 minutes and left.  Never cleaned up his mess.  I went to clean up the mess after he left and found there was more damage to the pipe.  I called him to come back, which he did.  He looked at the water coming down from the ceiling, into a light fixture and said he had another job to go to and couldn't come back until next week.  He also wanted to charge me $350.00 to come back.  I told him that was too much and he said he would make an exception and only charge me $219.00.  Now I have major damage done to the ceiling, the light fixture and the floor.  All of this could have been prevented if he had stayed and fixed the problem.  I will NOT hire him again.
Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[39] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[40]
Most plumbing training programs will include things such as coursework and on-the-job training. But, above and beyond what’s included you should expect other costs like books, tools, and uniforms which can range between a few hundred to a few thousand dollars. Depending on which program you choose, you may have to think about living expenses, as well.
I have no problem paying for any service I receive but when Allied Reddi-Rooter came into my home and immediately tell me and them tell me it would cost me 350.00 for them to install a new Rheem water heater (his recommendation) that cost 409.00 I have a problem. If the cost is exactly how Home Advisor indicates then he’s charging 350.00an hour.  I did my homework checked with other plumbers and it. Would not take an hour to remove old and install the new water heater. Thank Goodness I did my research won’t be using their services and I will be letting others know what happen to me. Shame on you Allied
×