Most large cities today pipe solid wastes to sewage treatment plants in order to separate and partially purify the water, before emptying into streams or other bodies of water. For potable water use, galvanized iron piping was commonplace in the United States from the late 1800s until around 1960. After that period, copper piping took over, first soft copper with flared fittings, then with rigid copper tubing utilizing soldered fittings.
Even the smallest leak can be costly and lead to potential long-term damage, and letting them go untouched will only further deteriorate your home. Whether you need emergency service or a check-up to determine the location of the leak, call the professionals at Mike Diamond. We’ll visually attempt to detect the leak in your plumbing and repair it the same day whenever possible.
Help! The toilet won’t stop running. It’s a bummer, sure, but it’s something you don’t need to call your plumber about. In fact, DIYers should take note that it’s a quick fix that will cost you just $5. For instance, your handle might just be sticking, which can be solved by spraying some lubricant where the handle meets the porcelain. Ready to DIY? Here’s how to fix a running toilet.
Water systems of ancient times relied on gravity for the supply of water, using pipes or channels usually made of clay, lead, bamboo, wood, or stone. Hollowed wooden logs wrapped in steel banding were used for plumbing pipes, particularly water mains. Logs were used for water distribution in England close to 500 years ago. US cities began using hollowed logs in the late 1700s through the 1800s. Today, most plumbing supply pipe is made out of steel, copper, and plastic; most waste (also known as "soil")[22] out of steel, copper, plastic, and cast iron.[22]

Our well-known jingle says it all—when you trust Roto-Rooter, we solve your residential plumbing and drain problems fast. Roto-Rooter is North America’s #1 residential plumbing repair and drain service company. Homeowners everywhere have relied on Roto-Rooter since 1935 for honest, professional advice on all types of drain cleaning and plumbing services.


Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[39] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[40]
We have been in business for a while during which we have acquired the necessary expertise to handle any plumbing issues. Therefore, by working with our company, you’re working with the best. On the other hand, our clients can verify that we always provide the best and most satisfactory services and we will do the same for any person that walks through our doors.
Here is an odd problem that I cannot figure out. I am handy with electrical stuff, but this one has me stumped. My small kitchen appliances all work on a single circuit, with 5 outlets. One of those outlets has a 20Amp breaker built into it with a test and resent button (I never understood what the test button is for). I only have a toaster, a floor lamp and occasionally a coffee grinder plugged into the circuit. Suddenly, none of the outlets work. Nothing new, no new appliances, the whole circuit went dead. I noticed when I trigger the reset button, there is an immediate click and it goes out again. I have tripped and reset the main breaker on the circuit board in the garage, nothing. Power gets to the outlet, but it doesn't work and there is no electricity in any of the 5. I un plugged everything. Reset the breaker on the outlet. It clicked again immediately, still no electricity. I changed out the outlet, with a new one with breaker built in which I bought today at Home Depot. Same problem. I tested for electricity, the outlet with the built in breaker receives 120v electricity coming in, but it always seems to be shorted out and does not send it out. I assume that all of the 5 outlets are connected inline, so thinking that if I went one by one, I'd be able to find a short. I opened all of the boxes, checked everything and all looks clean, new, no problems. I completely disconnected the two outlets that are closest to the main one with thereset button and nothing.Help

Sid called ahead and let me know what time he would show up. He arrived on time and quickly determined what needed to be fixed and explained it. He needed to make a few trips out to his truck to grab tools/supplies and put shoe covers on each time he entered the house. He quickly fixed our issue and cleaned up when he was finished. Great service from Sid! Just had another visit to fix a leaking meter horn. Andrew called 20 minutes before he arrived and quickly decided what needed repair. He didn't have the exact part needed on his truck, but he was able to get it from the warehouse quickly. He fixed our issue and cleaned up the area well. Thanks to Andrew and Ben Franklin Plumbing for fixing our plumbing problem on Christmas Eve!

Call us today to learn more about the services that we offer. Look at our company history to know more about the experience we’ve had throughout the years. Go to our services to learn more about the plumbing jobs that we can provide. It has never been easier to hire a plumber in Kuala Lumpur these day. With KL1 Plumber, you can hire a plumber at the comfort of your own home. Call us today!


"Beginning to end of experience was fantastic! Initial service agent who took my call was friendly and personable. Got me set up for an appointment same day — on a Saturday — no extra charge. And boom, two hours later, Nelson showed up. Nelson listened intentfully, got the picture/scope, got us our quote and we were off to the races. Courteous, fast, clean, insightful, and professional. Thanks, Nelson! "
Sid called ahead and let me know what time he would show up. He arrived on time and quickly determined what needed to be fixed and explained it. He needed to make a few trips out to his truck to grab tools/supplies and put shoe covers on each time he entered the house. He quickly fixed our issue and cleaned up when he was finished. Great service from Sid! Just had another visit to fix a leaking meter horn. Andrew called 20 minutes before he arrived and quickly decided what needed repair. He didn't have the exact part needed on his truck, but he was able to get it from the warehouse quickly. He fixed our issue and cleaned up the area well. Thanks to Andrew and Ben Franklin Plumbing for fixing our plumbing problem on Christmas Eve!
Certification: Certifications are not requirements, but they do help plumbers regarding career advancement. Once the plumber has completed the apprenticeship and has successfully gotten their license, they will be eligible to sit for the certification exams. There are a few different certifications available to plumbers. Through the Plumbing-Heating-Cooling-Contractors Association, in partnership with Green Plumbers USA, there is a training and certification program available for water and energy efficient technologies. With the way the environment is going green, this certification is a good idea for plumbers to consider. There is also the National Inspection Testing Certification(NITC) available to Journeymen Plumbers. The NITC also offers Journey and Master Plumber level certifications for plumbing codes and a Mastery certification exam for plumbers with over five years experience. There are fees involved, and they vary depending on the exam.
Pipefitters, sometimes simply called fitters, install and maintain pipes that carry chemicals, acids, and gases. These pipes are used mostly in manufacturing, commercial, and industrial settings. Fitters install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize as gasfitters, sprinklerfitters, or steamfitters.
With our highly trained and experienced technicians serving your plumbing, heating, and cooling needs, our workmanship comes with a 100% satisfaction guarantee. We don't send any of our staff members on the front line until we are completely sure that they are qualified for the job. For that reason, they're all drug tested and background checked before joining our team. We also require that they attend ongoing training to stay ahead of the curve with the latest advancements in technology.
I have no problem paying for any service I receive but when Allied Reddi-Rooter came into my home and immediately tell me and them tell me it would cost me 350.00 for them to install a new Rheem water heater (his recommendation) that cost 409.00 I have a problem. If the cost is exactly how Home Advisor indicates then he’s charging 350.00an hour.  I did my homework checked with other plumbers and it. Would not take an hour to remove old and install the new water heater. Thank Goodness I did my research won’t be using their services and I will be letting others know what happen to me. Shame on you Allied
We are here to help with yearly maintenance, water heater flushes, and pan replacement. For those suffering from a leaky water heater, John Moore can even repair your water damaged walls and floors without the headache of dealing with multiple contractors. Houston homeowners have counted on John Moore for decades. Each Houston plumber we employ is at your service.
×